Conference

International Conferences

Year 2009

  1.  S.H.Qaiser, A.I.Bhatti, M.Iqbal, R.Samar, and J. Qadir, “Non Linear Model Validation and Second Order Sliding Mode Controller Design for a Research Reactor”, Proceeding of International Conference on Industrial Technology (IEEE ICIT 09)  10-13 February, 2009 Churchill Victoria Australia.
  2.  M. Iqbal, A. I. Bhatti, S. Iqbal and I. H. Kazmi, “Fault Detection and Isolation of Nonlinear Systems  using Higher Order Sliding Mode Techniques”, Proceeding of 7th Asian Control Conference (ASCC 2009) , 27-29 August 2009, Hong Kong
  3.  Samar, R., Postlethwaite, I. “Design and Implementation of a Digital Multi-Mode H1 Controller for the Spey Turbofan Engine.” Journal of Dynamic Systems, Measurement and Control – Transactions of the ASME, 2009.
  4.  Q. Ahmed, A. I. Bhatti, “LMI Based Sliding Mode Control Design for Twin Rotor System” SIAM Conference on Control and Its Applications 2009, Colorado, USA.
  5.  Q. Ahmed, A. I. Bhatti, S. Iqbal, “Nonlinear Robust control design for Decoupling of Twin Rotor System”, Asian Control Conference (ASCC’09), Hong Kong.
  6.  Q. Ahmed , A. I. Bhatti, S. Iqbal, “Robust Decoupling Control Design for Twin Rotor System using Hadamard Weights”, CCA, MSC 2009, St. Petersburg, Russia.

Year 2008

  1. Iqbal, S., A. I. Bhatti and Q. Ahmed, (2008),”Determination of Realistic Uncertainty Bounds for a Stewart Platform with Payload’s Dynamics”, Proceedings of IEEE International Conference on Control Applications (CCA), September 3 – 5, 2008, Hilton Palacio del Rio in San Antonio, Texas, USA.
  2. M. Iqbal,  Q. R. Butt, A. I. Bhatti, A. Ayub, “Controller Synthesis of an Uncertain Three Tank System Using Polytypic System Approach”, Proceeding of 17th IFAC World Congress 2008, July 6-11, Seoul, Korea
  3. S. H. Qaiser, A.I. Bhatti and M. Iqbal, R. Samar, “Nonlinear Model Validation and Second Order Sliding Mode Controller Design for a Nuclear Research Reactor  “, submitted in 47th IEEE Conference on Decision and Control, Cancun, Mexico, 9-11 Dec 2008
  4. Kamal, W.A., and Samar, R. “A Mission Planning Approach for UAV Applications.” In Proceedings of the 47thIEEE Conference on Decision and Control. Mexico, 2008.
  5. M. Iqbal, A.I. Bhatti and Q. R. Butt. “Controller design of an uncertain three tank system using polytopic approach.” IFAC World Congress 2008. Seoul Korea, 2008.
  6. S. Iqbal., A. I. Bhatti and Q. Ahmed. “Determination of Realistic Uncertainty Bounds for a Stewart Platform with Payload’s Dynamics.” IEEE International Conference on Control Applications (CCA). San Antonio, Texas, USA, 2008.
  7. Samar, R. “Digital Filters for Gain Stabilization of Flexible Vehicle Dynamics.” 17thInternational Federation of Automatic Control World Congress. Seoul, South Korea, 2008.
  8. Samar, R., Ahmed, S., and Nazar, M. “Lateral Guidance & Control Design for an Unmanned Aerial Vehicle.” In Proceedings of the 17thInternational Federation of Automatic Control World Congress. Seoul, South Korea, 2008.

Year 2007

  1. S. Iqbal, A. I. Bhatti, M. Akhtar, S. Ullah, “Design and Robustness Evaluation of an H-inf  Loop Shaping Controller for a 2DOF Stabilized Platform”, Proceedings of European Control Conference 2007 Kos, Greece 2 – 5 July 2007, ISBN: 978-960-89028-5-5, pp 2098-2104.
  2. S. H. Qaiser, A.I Bhatti, M. Iqbal and Javed Qadir,”System Identification and Robust Controller Design for Pool Type Research Reactor”, 13th IEEE/IFAC International Conference on Methods and Models in Automation and Robotics MMAR 2007, 27-30 August Szczecin Poland.
  3. S. H. Qaiser, A.I. Bhatti and M. Iqbal, “Robust Control System design for Pool Type Research Reactor using Hinf Loop Shaping Technique”, Proceedings of The first International Conference on Physics and Technology of Reactors and Applications [PHYTRA 1] held at Marrakech, Morocco 14-16 March 2007.
  4. I.H.Kazmi, Q.R.Butt, S.I.A.Tirmizi, A.I.Bhatti, “Mathematical Modeling and Simulation of Automotive Internal Combustion Engine,” 5th WSEAS Internations conference on Environment, Ecosystems and Development (EED’07), Tererife, Canary Islands, Spain, December 14-16-2007.
  5. M. Iqbal, Q. R. Butt, A. I. Bhatti, “Linear Model Based Diagnostic Framework of Three Tank System”, WSEAS Conference SYSTEMS, WSEAS, CSCC, Crete island, Greece, July 2007, WSEAS Conference SYSTEMS, WSEAS, CSCC, Crete island, Greece, July 2007.
  6. N. Qaiser, M. Hussain, N. Qaiser, and M. Iqbal, “Novel Approach for Rotation Invariant Texture Recognition”, Computational Intelligence   (CI 2007), July 2 – 4, 2007 Banff, Alberta, Canada

Local Conferences

Year 2009

  1. M. Iqbal, A.I. Bhatti, Q. R. Butt and I. H. Kazmi, “LMI based Controller Synthesis of an Uncertain Three Tank System”, Proceeding of IBCAST 2009, January, Islamabad Pakistan.
  2. S.H.Qaiser, A.I.Bhatti, M.Iqbal and J. Qadir, “LMI based Control System Design for a Research Reactor”, Proceeding of IBCAST 2009, January, Islamabad Pakistan.
  3. Q.R.Butt, A.I.Bhatti, M.Iqbal, M.A. Rizwi, R.Mufti and I.H.Kazmi, “Estimation of Automotive Engine Parameters: Part I: Discharge Coefficient of Throttle Body”, Proceeding of IBCAST 2009, January, Islamabad Pakistan.
  4. H.Z.Bukhari, A.I.Bhatti, M.F.Aftab and K. Shafiq “Multi Objective Controller for Control Moment Gyro (cmg) using LMI”, Proceeding of IBCAST 2009, January, Islamabad Pakistan.
  5. K. Shafiq, M. Imran, H.Z.Bukhari, S.Ahmed and A.I.Bhatti, “LMI based Multi-Objective State Feedback Controller Design for Magnetic Levitation System”, Proceeding of IBCAST 2009, January, Islamabad Pakistan.
  6. I.H.Kazmi, A.I.Bhatti, S. Iqbal “Robust Controller using LMI framework for PEM fuel cell System,” ICET09, Islamabad, Pakistan October 19-20, 2009
  7. M. Rafique, S. U. Rehman, Q. R. Butt and A. I. Bhatti, “Power efficient sliding mode control of SR motor for speed control applications”, Proceeding of INMIC 2009, December, Pakistan.
  8. I. H. Kazmi, A. I. Bhatti, and M. Iqbal,” Nonlinear Observer for PEM Fuel Cell System using Super Twisting Algorithm”, accepted for presentation in IBCAST 2010, to be held in Islamabad, Pakistan.
  9. I. H. Kazmi, A. I. Bhatti, and S. Iqbal,” A Nonlinear Observer for PEM Fuel Cell System”, Proceeding of INMIC 2009,December, Islamabad, Pakistan.
  10. M. A. Rizwi, A. I. Bhatti, “Hybrid model for early detection of misfire fault in SI engines” ”, accepted for presentation in INMIC 2009, to be held in Islamabad, Pakistan.
  11. M. A. Rizwi, A. I. Bhatti and Q. R. Butt “Fault detection in a class of hybrid systems”, presented in ICET 2009, held in Islamabad, Pakistan.
  12. Baig, F., Amir, A., and Samar, R. “Design and Experimental Validation of a DC Drive for an Electromechanical Actuator Sytem.” In Proceedings of 6th International Bhurban Conference on Applied Sciences & Technology. Islamabad, Pakistan, 2009.

Year 2008

  1. S.H.Qaiser, A.I.Bhatti, M.Iqbal, R.Samar, and J. Qadir, “Higher Order Sliding Mode Observer Based Estimation of Precursor Concentration in a Research Reactor”, 4th IEEE International Conference on Emerging Technologies (ICET 2008),18 -19 Oct 2008, NUST Rawalpindi, Pakistan.
  2. T. Ahmed, M. Iqbal, A. Hamid, A. Ahmed, “Comparison of Direction of Arrival for Phase Array”, Proceeding of IBCAST’08, Islamabad, Pakistan 2008.
  3. S. H. Qaiser, A.I . Bhatti and J. Qadir and M. Iqbal, “LMI based Robust Control System Design for PARR-1”, Proceeding of IBCAST’08, Islamabad, Pakistan 2008.
  4. M. Ilyas, M. Iqbal, Jang Gyu Lee, Chan Gook Park, “Extended Kalman Filter Design for Multiple Satellites Formation Flying”, 4th IEEE International Conference on Emerging Technologies, 18-19 October 2008, Rawalpindi Pakistan.

Year 2007

  1. M.A.Gias, K.S.Karimov, S.I.A.Tirmizi, M.J.Mughal, M.A.Saqib, I.H.Kazmi, “A Photo-Voltaic System with Load Control,” ICEE 2007, Lahore, Pakistan.
  2. Alex Kavokin, Ijaz Kazmi, “The Comparative Analysis of Solutions of Phase Transformation Process by Using Two Different Models,” Third International Conference on 21st Century Mathematics 2007, Lahore Pakistan.
  3. Alex A. Kavokin, Ijaz H. Kazmi, Vladimir N. Mukazanov, “Mathematical Model of Phase Transformations in Thermo-Chemical Cathodes with Zirconium Insertion,” 10th International Symposium on Advanced Materials ISAM-2007, Islamabad, Pakistan.

Login